This month our Marlborough bra sewing pattern celebrates its five-year anniversary. It is hard to believe that five years have passed since we published our first sewing pattern! Since 2014 we have published over one dozen lingerie sewing patterns, including two underwear patterns (the Kingston thong and the Montgomery brief) that I created just so I could have a matching Marlborough bra and underwear set!
While the Marlborough pattern was our first pattern, based on pattern reviews and makes, it remains one of your favorites (mine too!). To celebrate its five-year anniversary, we decided to update the pattern instructions for all sizes to include even more information to help you make your own beautiful and professional looking lingerie. The sewing pattern itself, a time-tested classic, remains unchanged.
Let’s talk about what we updated. First of all, we invest a great deal of time and effort in our instructions to make it as easy as possible for you to make your own lingerie and our unique, detailed illustrations are a big part of that. For the updated instructions, we wanted to make the the illustrations larger, so it was even easier to see the all the construction detail for each step.
We also wanted to include elements that we have added to our other bra patterns over the years including more information on materials, cutting instructions and construction layout diagrams.
Finally, after teaching the Marlborough bra workshop for nearly as long as the pattern has been around, I wanted to streamline the instruction flow and add some extra helpful steps.
If you have already purchased this pattern, the update is available at no additional cost. If you purchased the Marlborough bra pattern through our website, you will receive an email with instructions on how to access the updated file.
If you purchased the pattern through Etsy, you will need to message us via Etsy referencing your order number and provide your email address so that we can get a fresh copy of the pattern to you. This process is necessary because Etsy does not have the ability to push out updated files.
If you have not purchased the Marlborough bra pattern yet, now is a great time to give it a try!
If there was one technique I wish for every sewist to use, it is this one! It works like a charm when sewing any garment but I find it particularly valuable when it comes to bra making. This method has reduced student construction errors in my bra making workshops to almost zero.
What is this method you ask? Dots! Specifically using colored dots to indicate which pieces are to be sewn together. Using dots is especially useful for bra making where the orientation of all those tiny pieces is sometimes, well, a bit puzzling.
I think the best way to describe how to use dots for sewing is to show you! Below I have used a variety of dots and dot colors to indicate the areas that match up for sewing for our Boylston bra.
To follow this method, start by laying out the pattern pieces as they will be sewn together. Then apply color dots to the pattern pieces at the points where they connect. For example, all the red points on the left hand side of the picture above will come together. There are already notches at these points, but color coding makes it easier to be sure the pieces are correctly lined up properly for sewing.
Notice that those same points are marked with true blue dots on the right hand side of the picture above. That makes it really clear which lower cup piece will get joined to which upper cup so the right sides and wrong sides of the garment do not get mixed up when sewing.
The above diagram also uses dots also for where the upper cup will be positioned on the bridge (the green dots) as well as the correct band to frame orientation (yellow dots on the left and purple dots on the right). You can even use dots to indicate how the straps are attached as I did above with the sky blue (left) and orange dots (right).
Don’t want to use so many dots? No problem. Below are what I have found to be the most critical dot markers for bra making.
Once you have all the pattern pieces dotted up, you will want to copy that, dot for dot and color for color on your fabric pieces.
Not only does this method improve your accuracy but it also increases sewing speed because you no longer need to go back and forth between your fabric pieces and your pattern pieces to insure your construction is accurate.
Happy bra making!
The Devonshire love continues! This week I have a tutorial for converting the cup from using lace to using fabric. This conversion allows you to carry through your fabric print (or solid) through the entire front of the bra like the scuba fabric Devonshire pictured above. This alteration is also a great workaround for when you are using an allover lace that does not have a scallop edge.
Before we dive in, remember all pattern changes are from the seam or trim lines and then the cutting line is established by adding your seam or trim allowance. Also, be sure to label your pattern pieces. You need to know what those pieces are for, especially if you are interrupted and need to set your project aside.
Now the overall approach to convert the cup to use fabric, is to add a trim allowance to allow you to stabilize and neatly finish the cup in the absence of a lace scallop edge.
Begin by taping both cup pieces to some tracing or pattern paper. Now, measure up the width of the trim elastic you use for the underarm. That same trim can be used to finish the upper cup. I really like this approach since it does not require any additional materials.
For my bra patterns the trim allowance for the underarm area is ⅜” for A to C cups and ½” for cup sizes D and greater. These are always marked on all our bra patterns so you can clearly see the trim allowance allowed and understand where to alter the pattern.
Now if you want to get fancy, you can take this a step further and reshape the upper cup. Without lace, we no longer need that straight line at the top of the cup and that allows us to add some contouring.
To get the curvy inner upper cup below, I measured the total width of the inner lower cup pattern piece along the upper edge (the solid black line at the top of the cup in between the seam lines). I then measured 75% of the distance away from the center of the overall cup and marked a point ¼” above the top edge of the cup.
To get the new curved line, I drew a smooth arcing convex line from the non-notched side of the inner cup (where it attaches to the bridge) and transitioned the line to a concave line toward the notched side of the inner cup (where it attaches to the outer cup).
You could even curve the top of the outer cup down a tiny bit (I used ⅛” below) as you move to the center of that pattern piece, bringing the line back up the existing top edge of the upper cup as you get to the underarm.
If you do decide to get fancy and add this kind of contouring to your cup, check your upper cup curve to be sure it is continuous and smooth all the way across by putting the cup pieces together along the top edge as if they were sewn.
When you go to sew the bra, apply elastic to finish the upper cup as directed for the underarm area. This application is made to the top of the completed upper cup and lining combination.
Yet another great option for your next Devonshire bra!
Thank you for your enthusiastic response to our new Devonshire bra sewing pattern! I am thrilled with the reception and can’t wait to see all the Devonshire bras that you all make!
Today I wanted to share some of my favorite looks that you can create using the Devonshire pattern. There are so many beautiful options!
STYLE 1: THE SWEETHEART
Can you believe how cute this is!? The fabric is a printed and reembroidered English lace with a scallop edge, paired with a matching double dose of croquet braid along the straps. English lace is a fabric with eyelet cutouts, which makes it stronger than regular lace yet still extremely charming. And yes! you can have fun with the criss-crossing of the ribbons for your center bows, here giving the bra a romantic / summer-in-the-countryside look.
STYLE 2: THE SEXY SPORTY
To me, the ultimate balcony bra is lace through and through. I love the the tone-on-tone; red lace, red straps, red elastic, red bow. Bright solid colors (up to neons!) add a splash of fun, giving the lace a contemporary and versatile look and a colorful reveal of the straps and edges of the bra under strategically layered tops.
STYLE 3: THE EXECUTIVE
For the lovers of streamlined looks, there is always the option to go slick and smooth by using solid tulles (they open up possibilities to play with transparencies) – and ribbon. I am also liking the solid, contrasting frame and band, which really highlights the cups.
STYLE 4: THE BAROQUE
A criss-crossed satin ribbon in the center and a gorgeous, transparent lace conjures up visions of 18th century French fashions. I especially like the layering of differently colored laces, and also how the fabric is climbing along the straps at an angle, creating a beautiful neckline reminiscent of a baroque dress.
STYLE 5: THE MERMAID
You can go retro by making wider straps, choosing poppy colors and bold prints or embroideries! Love how the cups here almost look like seashells – thanks to the stark scallop edge and stitching pattern. And let’s not forget the fun addition of the three contrasting bows.
STYLE 6: THE FOLKLORIC
Yes! The sky is the limit when it comes to fabrics and lace choices! Here the frame and straps are made of colorful brocade, a pattern reminiscent of the ones found in traditional Eastern European costumes. The lace matches the main background color, the bow picks up on the embroidery, and we have yet again a really interesting take on the straps, adorned with lace only on one side, which creates a beautifully soft neckline.
I can’t wait to see your Devonshire bra! Hashtag with #devonshirebra and #orangelingerie so I can find all of your beautiful versions!
I am super excited to introduce you to our newest underwire bra sewing pattern, the Devonshire bra!
For the Devonshire bra I wanted to create beautiful uplift with delicate lace. The first thing I think of for uplift from a bra are the cup seams and the underwire. Vertical seams are great for uplift since they direct the breast tissue upward.
From there, I designed the upper edge of the cup for a lace edge. The combination of the vertical seam with the lace scallop edge is just gorgeous.
The vertical seams provide such great uplift that I decided on a balconette style cup. I also love that with the single vertical seam, the cup height can be easily lowered toward a demi cup if you wish!
A fun feature of the Devonshire are the fabric straps. I really wanted to have many straps options, especially for spring and summer when straps are more visible. There are so many fun fabric straps variations and I can’t wait to show you some them!
As always, the pattern material includes the clear fully illustrated instructions you have come to expect from Orange Lingerie and each size is presented with the seam and trim lines.
As of today, the Devonshire bra pattern is available for A to DD cups in size 30 to 40 bands. If you love this style but are outside of that range, we have some good news! We are working on an extended size range for this pattern. If all goes well (and early indications are positive!) we will release the DDD to J size range later this year.
I hope you enjoy the Devonshire bra pattern as much as I do! Be sure to tag your makes with #DevonshireBra and/or #OrangeLingerie so I can find them all. I love seeing everyone’s unique version of our sewing patterns!