This month our Marlborough bra sewing pattern celebrates its five-year anniversary. It is hard to believe that five years have passed since we published our first sewing pattern! Since 2014 we have published over one dozen lingerie sewing patterns, including two underwear patterns (the Kingston thong and the Montgomery brief) that I created just so I could have a matching Marlborough bra and underwear set!
While the Marlborough pattern was our first pattern, based on pattern reviews and makes, it remains one of your favorites (mine too!). To celebrate its five-year anniversary, we decided to update the pattern instructions for all sizes to include even more information to help you make your own beautiful and professional looking lingerie. The sewing pattern itself, a time-tested classic, remains unchanged.
Let’s talk about what we updated. First of all, we invest a great deal of time and effort in our instructions to make it as easy as possible for you to make your own lingerie and our unique, detailed illustrations are a big part of that. For the updated instructions, we wanted to make the the illustrations larger, so it was even easier to see the all the construction detail for each step.
We also wanted to include elements that we have added to our other bra patterns over the years including more information on materials, cutting instructions and construction layout diagrams.
Finally, after teaching the Marlborough bra workshop for nearly as long as the pattern has been around, I wanted to streamline the instruction flow and add some extra helpful steps.
If you have already purchased this pattern, the update is available at no additional cost. If you purchased the Marlborough bra pattern through our website, you will receive an email with instructions on how to access the updated file.
If you purchased the pattern through Etsy, you will need to message us via Etsy referencing your order number and provide your email address so that we can get a fresh copy of the pattern to you. This process is necessary because Etsy does not have the ability to push out updated files.
If you have not purchased the Marlborough bra pattern yet, now is a great time to give it a try!
Over the summer I shared a lot of my favorite pro tips for bra making. As I was putting those posts together, I thought of even more tips to help you make your own beautiful and professional looking lingerie! Below I capture a few of my favorites.
Sewing Small Pieces
Sewing small pieces can be tricky. If you are having difficulty you can always sew from the middle outwards. No one ever said you have sew from end to end! This can make it easier to control those tiny and sometimes slippery bits of fabric in a bra making project.
Another way to sew small and/or slippery pieces is to start your seam with a small fabric leader or piece of paper at the beginning of a seam. A fabric leader also helps if your machine wants to eat the fabric at the start of the seam.
Chain sewing where you sew continuously from one seam to another is another great technique and saves construction time overall as well.
Working with Shifty Fabrics
When sewing power net (or power mesh) to another fabric on a conventional sewing machine, such as when you attach the frame to the band, sew with the power net on the bed of the machine and the other fabric on top. With this method the power mesh seamline does not get stretched and you get a nice flat straight seam. Of course, you could also overlock this seam on your serger!
Working with Bra Kits
Before you cut out your pattern, check trim and elastic sizes on your pattern and compare them to what you plan to use. On Orange Lingerie bra sewing patterns these lines are all clearly marked on each pattern piece for easy reference.
This tip is especially important if you are using a bra making kit where the trim and elastic widths vary and may be different from the pattern allowances. It is so much easier to make any necessary adjustments before you cut out your garment.
Add to the Band
I have students add 1 ¼” to the band, regardless of the size they are making, to account for the different properties of various Power Net fabrics and elastics. This adjustment (tutorial here) gives you some breathing room (literally) to account for different materials.
This is especially important for the A to DD size ranges for the Marlborough and Boylston bras since those bands were drafted to be firm using a fairly stretchy power mesh and a soft and stretchy band elastic.
Over the years bra kits have evolved to include firmer power net and firmer elastic. This is great for support but using the kit materials without first increasing the band could lead to a bra that is too tight! It is super easy to make a band smaller if it turns out to be too big, but it is difficult to make a band larger!
That is why for insurance, and to avoid a lot of extra work with stretch calculations, I just add 1 ¼” to the band. You can read the tutorial here.
Check the Closure Height
I teach this adjustment in all of my workshops and have been adding this to our bra patterns as well as a reminder to check the closure height of the bra and to adjust as necessary to precisely fit your hook and eye closure. You can read the tutorial here.
Track Your Changes
Take notes while you sew! Write down the settings on your machine like your sightline/guide you use on your presser foot, and your preferred presser foot for topstitching.
Also write down the date of any pattern changes along with what you changed and what you want to alter next time. I also recommend taking pictures of each version of the garment on the body and storing all the information your preferred note taking app. I cannot even begin to tell you how important my notes are to the design and pattern making process!
Add your bra making tips to the comments below!
If there was one technique I wish for every sewist to use, it is this one! It works like a charm when sewing any garment but I find it particularly valuable when it comes to bra making. This method has reduced student construction errors in my bra making workshops to almost zero.
What is this method you ask? Dots! Specifically using colored dots to indicate which pieces are to be sewn together. Using dots is especially useful for bra making where the orientation of all those tiny pieces is sometimes, well, a bit puzzling.
I think the best way to describe how to use dots for sewing is to show you! Below I have used a variety of dots and dot colors to indicate the areas that match up for sewing for our Boylston bra.
To follow this method, start by laying out the pattern pieces as they will be sewn together. Then apply color dots to the pattern pieces at the points where they connect. For example, all the red points on the left hand side of the picture above will come together. There are already notches at these points, but color coding makes it easier to be sure the pieces are correctly lined up properly for sewing.
Notice that those same points are marked with true blue dots on the right hand side of the picture above. That makes it really clear which lower cup piece will get joined to which upper cup so the right sides and wrong sides of the garment do not get mixed up when sewing.
The above diagram also uses dots also for where the upper cup will be positioned on the bridge (the green dots) as well as the correct band to frame orientation (yellow dots on the left and purple dots on the right). You can even use dots to indicate how the straps are attached as I did above with the sky blue (left) and orange dots (right).
Don’t want to use so many dots? No problem. Below are what I have found to be the most critical dot markers for bra making.
Once you have all the pattern pieces dotted up, you will want to copy that, dot for dot and color for color on your fabric pieces.
Not only does this method improve your accuracy but it also increases sewing speed because you no longer need to go back and forth between your fabric pieces and your pattern pieces to insure your construction is accurate.
Happy bra making!
Unique to our bra styles, our new Devonshire bra has a two-piece vertically seamed cup to provide beautiful uplift. With this new style I thought it would be helpful to post the most common pattern alterations that you can use to customize the fit of your Devonshire.
Like our Boylston bra, the Devonshire bra is a balconette style. For balconette styles, the straps are purposely positioned out fairly far on the shoulder. This strap placement is to allow for the display of the maximum décolletage.
Because all bodies are different, this strap placement does not work for every body. Luckily it is simple to move the straps in toward the center of the body. The easiest way to do this is move the strap in toward the center of the body, we will remove the excess material from the underarm area.
Start by measuring the amount that you want to move the straps in by pinching out unwanted length from the upper cup near the strap. Another method is to roll the strap over (right side of strap to right side of cup) and measure the amount of the material folded over the bra.
Next, lay out the outside cup, frame and band matching them at the seamlines and mark the amount that you are moving in the strap on the cup. Then draw a new trim line (the dotted line in the underarm area) that smoothly connects from your marked point to where the cup attaches to the frame. Finally, add back your cutting line (the solid line). The orange lines show the alteration.
I recommend laying out the pieces as shown above to be sure you have a nice smooth line all along the top of the bra.
Another possibility with a balconette bra is that the straps are in the right place, but the upper cup is too large, that is, the cup stands away from the body. To decrease the upper cup, we will remove excess fabric using the cup seam.
Start by determining how much you want to decrease the cup by pinching out the excess material along the top of the upper cup from your toile (a.k.a. muslin or mock up). I recommend pinching out a dart, not just a tuck at the top, so you can have greater accuracy on the decrease and how deep to extend the decrease down the cup.
Now, measure in ½ the amount of the decrease from the top of the cup at the center seam line on each cup piece and redraw that center cup seam on both cup pieces tapering the decrease to zero at the existing seam line. Finally, draw in your new seam allowances to get your new cutting line.
If you need to increase the upper cup, that is the upper cup is too tight on the body, you will add to the center seam of the upper cup.
Start by estimating the amount you want to increase to the upper cup. To estimate it is helpful to determine how far you would need to move the upper edge of the cup in from the underarm for the fit to be smooth along the upper cup.
To make the alteration, start by taping the cup pattern pieces to some tracing or pattern paper then measure out ½ the amount of the increase from the top of the upper cup at the center seam line on each cup piece and redraw those center cup seams, tapering the decrease to zero at the existing seam line. Finish by adding in your new seam allowances to get your new cutting line.
Want more upper cup adjustments and strap moving tutorials!? We have got you covered! Here is our tutorial for moving the Marlborough straps, our tutorial for moving the Boylston straps, and our tutorial on upper cup adjustments.
Happy bra making!!
I am super excited to introduce you to our newest underwire bra sewing pattern, the Devonshire bra!
For the Devonshire bra I wanted to create beautiful uplift with delicate lace. The first thing I think of for uplift from a bra are the cup seams and the underwire. Vertical seams are great for uplift since they direct the breast tissue upward.
From there, I designed the upper edge of the cup for a lace edge. The combination of the vertical seam with the lace scallop edge is just gorgeous.
The vertical seams provide such great uplift that I decided on a balconette style cup. I also love that with the single vertical seam, the cup height can be easily lowered toward a demi cup if you wish!
A fun feature of the Devonshire are the fabric straps. I really wanted to have many straps options, especially for spring and summer when straps are more visible. There are so many fun fabric straps variations and I can’t wait to show you some them!
As always, the pattern material includes the clear fully illustrated instructions you have come to expect from Orange Lingerie and each size is presented with the seam and trim lines.
As of today, the Devonshire bra pattern is available for A to DD cups in size 30 to 40 bands. If you love this style but are outside of that range, we have some good news! We are working on an extended size range for this pattern. If all goes well (and early indications are positive!) we will release the DDD to J size range later this year.
I hope you enjoy the Devonshire bra pattern as much as I do! Be sure to tag your makes with #DevonshireBra and/or #OrangeLingerie so I can find them all. I love seeing everyone’s unique version of our sewing patterns!